, & Netgear Setup

We provide easy steps to access page. When you need to login into page to setup your netgear router you have to access page. Most of the time you receive an error saying router could not be found or not connected to your router. Using router login page you can access the management page. 

ROUTERLOGIN.NET web protal for Netgear routers

When accessing this page you need to be connected with your router to access this page. 

  • Using in your browser you can manage your router. 
  • Access the address in the browser and login with your credentials. 
  • If you are using correct login details you can access the page. 
  • Router page can help you to change its settings. 
  • If you cannot remember the login details then you can use forget option. 
  • It’s a default option which appears on its own. 
  • Using your router serial number and answering security questions you can find the login information. Troubleshooting Steps 

Steps given above can help you to login to router page but if it is not working then you can check troubleshooting steps. 

  • Make sure you are connected to your router. 
  • Check the address you are typing only. 
  • You can use Default IP address to login. 
  • Use Ethernet cable from router to PC to access page. 
  • Reset the router also helps when login page is not working. 
  • Once login is done you can use quick setup or step wizard will start the setup. 
  • Follow the instructions on the screen. 
  • Always select help me choosing option for easy setup. 
  • For advance user you can change the setup option. 

Configure your Netgear router to access admin login, follow the steps: 

  • First, ensure that you are using the correct web address to login to the router.
    Web address: www.routerlogin.comor 
    • Enter any one of the aforementioned web address in any internet browser. 

    • The user can also try logging in using the default IP addresses for their Netgear router. 
    IP address: or 
    • Enter the default username and password when prompted. 
    • User Name : admin 
    • Password : password 
    • The user will have logged in successfully. 
    • If the default information is rejected by the admin login page, try entering any personalized passwords. 
    If that fails too, try to reset the router. 
    Once the user has logged in, the user can further configure their network. 

Get Your Free Consultation

Reach out to router experts for help !



  • Open your desired internet browser and type or in the address bar. 
  • You will get a prompt to enter the default information regarding the router to sign in. 
  • Now you need to select ADVANCED option. 
  • Now, select the Firmware Update option. 
  • You have to click on Router Update or Firmware Update option. 
  • Click Check button. 
  • The router will now look for a firmware update and ask to install if any is available. 
  • Click Yes to begin. 
  • Now the router will flash new firmware and reboot the router. 
  • Once the router has finished updating, the router will reboot itself. 

These steps are only valid if your cable connection and internet connection is good. Check the instruction for cables Connecting Your Router 

  • You should have working internet. 
  • Ethernet cable from modem or wall should be connected to router internet port. 
  • Ethernet cable from router to PC. 
  • Make sure power LED is solid green or white. 

      Issues you can face when login into router page 

  • Web address for netgear router is not valid or working.
  • Login details are not valid. 
  • Cannot change wireless name or password. 
  • Administrator password not changing. 
  • Device list is not showing devices. 
  • Internet showing not connected. 
  • Wireless keeps on disconnecting. 
  • Firmware upgrades not working. 

We have experienced IT solution team which provides call and remote support using advance tools. Customers facing such issues can contact our support team anytime and resolve each issue efficiently. 


The Netgear Nighthawk routers are configured with the factory default settings initially. Change the default username and password to improve the security on the network, 
• Launch a internet browser and type in the address bar. You can also use ip address 
• The login window will display enter your default credentials. 
• The Basic Home Page will display where you need to select ADVANCED option. 
• Select Administration under Advanced option and enter the new username in the Network Name (SSID) field. 
• Enter the new passphrase in the Network Key (passphrase) field. 
• Click the Apply button to make changes. 


Due to many reasons users may not be able to access the login page. In most cases common reasons are browser cache and IP address problems of network. In order to solve out your problems follow the below steps to gain access to your router admin page:

  1. Make sure that you are using the correct user name, and password.
  2. Web address should be : or
  3. User Name should be admin and Password should be also admin (default password) 
  4. If you are receiving an error when with web address , , clear your browser cache. 
  5. If still facing issue you can also use your router IP address ( or to gain access to login page instead of or , addresses.  
  6. If you are still in problem with the router login page try to access it using wired connections. Ethernet connection. 
  7. If you have multiple networks connections at the same time, such as wired and wireless, VPN in that case the router login page may not work so be careful about it also.
  8. Temporarily disable pop-up blockers, firewalls, and ad blocking software to see if any of these are causing access issues to the router login user name and password pop-up or try with Power off your router, modem, and devices for at least 10 seconds and then power on it.
  9. You need to perform a factory reset of the router ifIf problem remain continuous and none of the above steps work . 
  10. Now login into your router using the information in above step 1.
  11. Be ensure your firmware is up to date in order to  prevent from  further login issues . 

Access after setting up 

If you want to configure your router later on after setting up the router then you have to log in by using the username and password. Steps to access after setting up wifi router

  • Launch an Internet browser. 
  • In the address bar, enter or login screen appears. 
  • Login by entering the default credentials. 
    By default, the username is admin and password is password. (Both are in lower case) 
  • Hit enter or click on login button. The home page of the router displays. 
  • Now you can change different settings of your router. 

Forogot netgeear router wifi password-

If you have forgotten your administrative password after changing it, then you can get it back by resetting your Netgear router back to default settings by taking Netgear support services. But, before proceeding, make sure that this will make it like brand new. This means that all your previous settings and password will be reset and you need to configure it again. To reset it, follow these steps: 

  • Look for a tiny hole or reset button and use a paper clip to press it. 
  • Hold it for 30 seconds until the lights on the router starts flashing. 
  • This indicates that your router has been reset. 
  • Now, you can login with your default username and password and re-configure your settings. 
  • After this, you need to go through the whole setup process all over again and connect your router to your computer as well as the modem. Don’t forget to secure it with the necessary encryption, SSID name and network key. 
  • After re-configuration, you also need to connect your devices again. 


Parental control – This feature can give you freedom to control your router and the user usage. Restricting websites and content for children. Scheduling usage time for connected devices can be a best way to control your home wireless. Using netgear genie app can help you to setup parental control & also you can control these settings remotely from anywhere. 

Increasing Wireless performance –  Easy options available to increase wireless performance by simply checking new firmware update. Changing  channel values can improve signals. You get option for both bands 5Ghz and 2.4Ghz. 

QoS – Quality of service can help you when you need to control bandwidth over each device. Enabling this feature can help you when you are facing slow speed on some devices. This feature helps you to distribute bandwidth equally to all devices. 

Port Forwarding / Triggering – Most of the applications and games required multiple connections. It can be used when applications cannot work with a pure NAT router. 

DMZ –  This host feature allows local host to be exposed to the internet for a special purpose service such as internet gaming or video conferencing. The Router forwards packets of all services to the DMZ host. When a PC is set to be DMZ host, it’s better to disable its DHCP client function and set a new static IP address to it, because its IP Address may be changed when using the DHCP function. 

Live statistics – Here you can check live usage of the internet by each device. So you can see who is using internet in curfew or how much usage is done by that device. 

error: Content is protected !!